Currie 28 spline axel kit?

shelbymustangdan · 11-06-2009, 05:41 PM

Does the Currie axel kit #RA23 come with the new bearings and wheel studs already pressed on and ready for installation? (ie....no additional work required, other than to slip them into the axel housing)

Thanks!

Rick@cjponyparts · 11-07-2009, 07:09 AM

I doubt the studs are already pressed in, the fox body axles that I have seen do not have them installed. The axle bearings need installed into the end of the axle housing.

shelbymustangdan · 11-07-2009, 12:26 PM

Is that something your service shop would consider doing? If so, how much would they charge to put it all together so I just have to slip them in?

Bill@cjponyparts · 11-09-2009, 09:32 AM

We would charge about an hour of labor ($65) to press in the studs. The axle bearings go into your axle housing, not on the axle itself.

11-06-2009, 05:41 PM	#1
shelbymustangdan Junior Member Join Date: Mar 2007 Location: Downingtown Posts: 12	Currie 28 spline axel kit? Does the Currie axel kit #RA23 come with the new bearings and wheel studs already pressed on and ready for installation? (ie....no additional work required, other than to slip them into the axel housing) Thanks!

11-07-2009, 07:09 AM	#2
Rick@cjponyparts CJ Pony Parts Moderator Join Date: Oct 2006 Location: Harrisburg, PA Posts: 1,775	I doubt the studs are already pressed in, the fox body axles that I have seen do not have them installed. The axle bearings need installed into the end of the axle housing. __________________ Rick - Purchasing 93 Calypso Green LX Built 306, MM suspension bits and 5 lug Disc Brakes 90 Black on Black GT Basic bolt-ons

11-09-2009, 09:32 AM	#4
Bill@cjponyparts CJ Pony Parts Moderator Join Date: Oct 2006 Location: Harrisburg, PA Posts: 633	We would charge about an hour of labor ($65) to press in the studs. The axle bearings go into your axle housing, not on the axle itself. __________________ Bill - CJ Service Manager - SCT Certified Tuner 1996 Cobra - Full 04 Cobra swap bumper to bumper. 475/465 at the wheels 1996 Cobra - Krimpstang - basic bolt ons 1966 Factory Five Roadster - 347, GT-40X, Cobra intake, E cam, 5 lug, Halibrands Driver/Tuner - Fastest S197 at CJ's 12.23@110 with basic bolt-ons 05 Mustang GT Project Car

11-07-2009, 12:26 PM	#3
shelbymustangdan Junior Member Join Date: Mar 2007 Location: Downingtown Posts: 12	Is that something your service shop would consider doing? If so, how much would they charge to put it all together so I just have to slip them in?